Simulation Focus Industrial Microscope With LED Ring Light Illuminator Lamp & 60 MegaPixel Ultra Full High Definition HDMI USB Memory Card Supported Video Recording Camera
Simulation Focus WF10X/20 Eyepieces 3.5X-180X Magnification Table Pillar Stand Trinocular Stereo Zoom Industrial Microscope Adjustable Focus Bracket For Mobile Phone, CPU, PCB, Mother Board Soldering Repair Station.
LED Ring Light Illuminator Lamp Specification:-
Microscope LED Ring Light Illuminator Lamp For Microscope Excellent Circle Light Industrial microscope camera light source.
Name:LED Ring Light Source Model No: LEDHXD001 Color: White Voltage: 220V Size: 100mm Power: 5W Flux: 60000LM Protection Grade: IP40 Color Temperature: 6500-7000K Type: Special Microscope Led Ring Lamp Material:Plastic G.W: 250g External Diameter:95cm Inner Diameter:63cm Light intensity adjustment 0-100%,Color unchanged ween you adjusty intensity,Without electricity flash,Input power:AC90-260V.
60 MegaPixel Ultra Full High Definition HDMI USB Memory Card Supported Video Recording Camera (Brand NAVA)
Color adjustment: color / / black and white
White balance adjustment: fully automatic / / one button white balance / / manual
Exposure adjustment: automatic mode / manual mode
Photo mode HDMI output: 1080P @60 frames / sec
Moving reference lines: horizontal or vertical lines can be moved
Memory card configuration: 4GB (up to 64GB)
Middle cross scale marking function: overlay or cancel
Lens interface: standard C interface
Working temperature: 0-70 ° C
10X-300X C-MOUNT Lens:
Working distance: 95mm
Zoom c-mount Lens 1.0X C-mount adapter
Zoom ratios: Objective Magnification Power by 0.7X - 4.5X(about 10X- 300X on the display)
Size: 24.5mm(L) * 50mm(DIA)
Function button operation introduction:
POWER/MODE button: This camera is plugged in, long press for 3 seconds to shut down normally, then press 1 second to restart. After the red indicator light is on, the drip sound is turned on successfully. After booting, press 1 second to switch to recording mode. Press 1 second to switch to photo and movie preview mode, then press to return to the photo mode, then press and hold for 3 seconds to turn off;
MENU button: Press and press for 1 second after booting, enter the menu page, you can select each function by UP/DOWN, then press OK to enter the selected menu a) Chinese and English language settings: press UP/DOWN to select, then press OK Key confirmation; b) Grid line setting: press UP/DOWN button to select, press OK button to enter, then press UP/DOWN button to select the cross line ruler to open or close, 8 lines open and close, each The direction of the line is the color of the line, then press OK to change the direction/position/color/thickness of the line, press MENU to return to the previous layer of the menu; c) Exposure setting: press UP to increase / DOWN to select auto exposure or In the manual exposure mode, press the OK button to confirm; d) the exposure value setting: in the automatic exposure mode, select the +-0.3/0.71.0/1.3/1.7/2.0 exposure value as needed; e) white balance: select auto after entering / Manual / one-button white balance, if the light source is adjusted, the color may be biased, you can put a white paper to select a key white balance to correct the color; in special applications, you can also adjust the R red value and B by manual mode. Green value; f) color: color or black and white can be selected as needed; g) light source frequency : 50Hz and 60Hz according to the national conditions; h) Sharpness: select strong / standard / soft three i) contrast setting: select high / medium / low according to needs; j) video size: can be selected according to needs 2K24fps/1080P 60fps/720P 60fps three formats; k) Mirror function: Vertical mirror and horizontal mirror function can be selected as needed; g) Format: If the newly purchased card or occasional problem card can be selected before the photo storage ;h) Restore factory settings: This function is to restore the factory settings; i) System information: This information is the software version information at the factory; Press MENU to exit the menu mode;
OK/Photo/Video button: In the boot mode, short press is to take a picture. In the video mode, short press to start recording or stop recording. In MENU mode, this button is the selection confirmation button, the line Switch / horizontal / vertical switching, first position adjustment, line color / thickness switching;
UP/+ button: In the boot photo mode, short press this button to increase the exposure value, and in the menu mode, the up menu is selected;
DOWN/- button: In the boot mode, short press this button to reduce the exposure value, and in the menu mode to select the menu up;
HDMI connector: When connecting to a monitor with an HDMI input, use a 16:9 widescreen monitor to display it.
USB/PC interface: 1) Connect the configured USB cable to the computer and turn it on. If there is a memory card in the camera, the computer display reads the mobile hard disk device. This is the picture or video file of the SD card in the camera. Can be copied to a computer or previewed; b) If there is no memory card in the camera, then the computer reads the camera device, can read the image in PC CAM computer camera mode-----free drive
Note: DC/12V interface is a camera input power supply specification of 5V-12V/1A wide voltage power adapter. It is forbidden to use unmatched power supply, otherwise it will burn the camera.